Heat Controller With lcd, Thermostat
(Aquarium, Reptile, Poultry, Incubators, heat mat, emitter, heat lamp)
Features:
-
High Quality Product
-
Super Accurate Digital Controller
-
Easy to Set and Operate
-
Easy to Read Backlit Digital Display
-
Superior Control Range
-
MASSIVE 800W Switching Capacity
-
Short Circuit Protection Function
-
Connects ANY heating device
-
Through external probe to monitoring the temperature of emitters, prevent overheating
-
Digital Probe Thermometer with LCD screen
-
Probe line length: 245cm
-
Reliable circuit, high quality material making sure of heat output and effective area.
-
Controllable temperature range: -9 to +38 degree.
-
Electrical parameter: 50-60HZ, 220-240V
Applications:
Control ANY heating device for:
-
Reptiles
-
Amphibians
-
Scorpions
-
Spiders
-
Aquariums
-
Incubators
-
Heating
-
Cooling
-
Home Brewing
-
And many more.
Operating instructions:
-
Switch on the controller with power. The screen shows current temperature, but works on default setting temperature 16degree.
-
Button "SETTING": used for switch between "WORK" and " TEMPERATURE"
-
Press once, the controller go into setting mode, press another, the controller goes back to working mode.
-
Button "TEMPERATURE +": used for elevating temperature
-
When the screen shows "SETTING", each pressing on the button elevates 1 degree . Long pressing on increases the temperature till +30 degree . After 5 seconds no operating, the controller returns to working mode.
-
Button "TEMPERATURE -": used for lowering temperature.
-
When the screen shows "SETTING", each pressing on the button reduce 1degree . Long pressing on lowers the temperature till +5degree . After 5 seconds no operating, the controller returns to working mode.
-
When the Green light is always on, the device is in cold protection. The power will be cut when temperature drops below your set.
-
When The Red light is always on, the device is in warming protection. The power will be cut when temperature is above your set.
Heating:
-
Controllable temperature range: -9 to +38 degree .
-
When current temperature ≤ set temperature - 1degree ,switch on the power;
-
When current temperature ≥ set temperature + 1degree ,cut off the power;
-
set temperature -1degree < current temperature < set temperature +1degree, the working mode remains the same.
Protection function
-
When short circuit occurs, temperature screen shows [dd ], the power aulo cut off.
Attention:
-
When circuit recover, the controller works on default setting temperature. User should re-set the temperature for needs.